Services
Plumbing repair, installation, and preventive checks—with scope you can plan around
This page is a practical service catalog for Asovves Plumbing. We focus on plumbing repair, plumbing installation, and a preventive home plumbing check. Each section defines what the service covers, common scenarios, what we include and exclude, and how to prepare—so scheduling is predictable and decisions are documented.
Plumbing Repair
Scope, common scenarios, and checklists
Diagnosis and repair for leaks, clogs, low pressure, running fixtures, and common plumbing failures with clear scope boundaries.
Plumbing Installation
Scope, common scenarios, and checklists
Fixture and appliance installation (faucets, disposals, toilets) with compatibility checks, parts guidance, and post-install verification.
Preventive Home Plumbing Check
Scope, common scenarios, and checklists
A practical inspection checklist focused on early warning signs, shutoff locations, and maintenance actions to reduce surprises.
How this catalog is meant to be used
Plumbing is full of “it depends,” but most uncertainty comes from scope, access, and part compatibility. We publish boundaries so you can choose the right service line item, prepare the area, and reduce the chance of mid-visit pivots. If you want a fast starting point, use the pricing matrix to map your symptoms to the closest scope, then bring the notes to your appointment.
Service 01
Plumbing Repair
Plumbing repair is the “make it work safely again” lane. We handle leaks, clogs, low pressure, running fixtures, noisy pipes, and common failures in sinks, toilets, disposals, and visible supply/drain sections. The main goal is a stable, tested outcome with a documented scope—so you know what was repaired, what remains, and what to watch next.
We treat repair as a combination of diagnosis (identify the failure mode), fix (replace/adjust the failing component), and verification (leak test, function test, and handoff). If we discover that a “repair” is actually a “replace” due to corrosion, code constraints, or incompatibility, we pause and explain options before proceeding.
Scope definition (repair)
Repair scope is focused on accessible fixtures and visible plumbing sections. “Accessible” means we can safely reach the component without demolition and can shut water off reliably. Typical included components: faucet supply lines, angle stops, trap assemblies, fill/flush valves, disposal mounting sections, and standard drain connections.
If the problem requires opening walls, removing cabinets, or extensive remediation (drywall, flooring), we separate that work and recommend the right next step. This keeps your plumbing invoice clean and prevents hidden “scope creep.”
Repair mini-checklist (before we arrive)
- Clear the work area (under sink, around toilet, or water heater closet).
- Note when the issue occurs (only hot? after flushing? after running disposal?).
- If safe, take 2–3 photos (leak point, valves, and any labels).
- Tell us if shutoff valves are stuck or if pressure is inconsistent.
Repair outcomes we aim for
A successful repair isn’t just “it stopped leaking.” We document the failing part, replace or adjust it with the right fit, and then verify under normal usage. For clogs, verification means running water for an appropriate time and confirming normal drainage without gurgling or backup.
If a symptom suggests a bigger system issue (for example, multiple drains backing up), we’ll explain what we can do within the repair visit and when it becomes a different scope category. When in doubt, check the pricing matrix for the closest match.
Leak repair verification
- Water on, observe joints
- Wipe & re-check after 5–10 minutes
- Confirm shutoff function
Drain repair verification
- Run water at normal flow
- Listen for gurgle / airlock
- Check for seepage at traps
When repair turns into replace (and why that’s normal)
Compare in pricing matrixSome fixtures are inexpensive to swap but frustrating to rebuild—especially with heavy corrosion, non-standard parts, or repeated failures. If we see a repair that is likely to fail again soon, we’ll show you the reasoning and offer a replacement option with a clear parts list. That keeps the decision yours and avoids paying twice for labor.
Service 02
Plumbing Installation
Installation is for planned changes: new fixtures, replacements, or appliance hookups that must be compatible, secure, and tested. We install common items like faucets, garbage disposals, toilets, and related visible connections. The key difference from repair is that installation includes compatibility checks and post-install verification as first-class steps.
We’ll guide you on parts selection (standard vs premium tiers), confirm sizing/rough-in constraints, and clarify what supporting parts are required (supply lines, angle stops, mounting hardware). If you already purchased a fixture, we’ll verify it’s suitable before we start—because the fastest way to blow up an install is a mismatch discovered mid-job.
Scope definition (installation)
Installation scope includes removing the old item (where applicable), preparing mounting surfaces (within the plumbing lane), setting the new item, connecting supply and drain interfaces, and testing under normal use. We aim for a clean install that doesn’t rely on “temporary” tricks like overtightening, incompatible adapters, or unsafe sealants.
If the installation reveals upstream problems—like a failing shutoff valve, corroded stub-out, damaged flange, or mis-sized drain—we’ll pause and give you options. Those supporting fixes may be required for a safe installation, and we treat them as explicit line items rather than silent add-ons.
Installation mini-checklist (before purchase)
- Confirm size/fit: faucet hole count, toilet rough-in, disposal mount type.
- Decide finish and tier: standard vs premium (affects parts and lead times).
- Check return policy and keep packaging until verified.
- Send photos of the current setup if you want pre-visit guidance.
Post-install verification (what “done” means)
A correct installation is tested—not guessed. We verify alignment, seals, and operation. For disposals, we confirm mounting, drain connection integrity, and leak-free operation. For toilets, we verify stability, flush performance, and no seepage at connections. For faucets, we check aerator flow, hot/cold mapping, and all under-sink joints.
Install handoff
- Operational walkthrough
- Care and maintenance notes
- What to monitor for 48 hours
Optional upgrades
- New shutoff valves
- New supply lines
- Trap refresh if brittle/corroded
Pricing and scope examples: /pricing/#matrix
Service 03
Preventive Home Plumbing Check
Preventive checks are for “nothing is broken… yet.” The goal is to reduce surprise leaks, catch early corrosion, confirm shutoff locations, and create a short maintenance plan. This is especially useful for new homeowners, rentals between tenants, or anyone who wants to know what would fail first.
We focus on practical, high-signal items: visible supply lines, shutoff operation, under-sink seepage, toilet fill behavior, and any signs of slow drainage. If we find a clear repair, we’ll document it and can convert to a repair scope with your approval. If you want to understand typical next steps and how they map to costs, keep the pricing matrix handy.
Preventive check mini-checklist (what we look at)
Water control
- Main shutoff location (as visible)
- Fixture shutoffs and labeling
- Signs of weeping at valves
Under-sink health
- Trap alignment and corrosion
- Supply line condition/age
- Cabinet moisture staining
Fixtures
- Toilet fill/flush behavior
- Faucet aerators and spray patterns
- Visible leaks at bases/handles
Drain signals
- Slow drains and gurgling indicators
- Disposal vibration or seepage
- Odor sources near traps
What this service is not
A preventive check is not a full code inspection and not destructive. We won’t open walls, remove flooring, or pressure-test behind finished surfaces. Think of it as a high-coverage screening: it identifies the most common early warnings and gives you a prioritized plan.
If we find a clear issue
We’ll categorize it as repair now, schedule soon, or monitor, then point you to the closest line item in the pricing matrix.
What’s included vs not included (scope boundaries)
This table sets expectations across plumbing repair and installation visits. It’s designed to prevent misunderstandings and help you compare quotes fairly. If you want to cross-reference a likely price band, use /pricing/#matrix.
| What we do (included) | What it means in practice | Typical example |
|---|---|---|
| Basic diagnostics for the reported issue | We identify the most likely cause using visible access points and standard tests | Tracing a leak source under a sink |
| Minor leak repair at accessible fittings | Tighten/replace seals, washers, supply lines, or trap parts when accessible | Drip at P-trap slip joint |
| Clog clearing (standard fixtures) | Mechanical clearing for typical kitchen/bath clogs (no excavation) | Bathroom sink slow drain |
| Fixture reset/adjustment | Adjust fill valves, flush chain length, aerators, and handle assemblies | Toilet running intermittently |
| Shutoff identification & labeling (when accessible) | Locate and label fixture shutoffs and main shutoff if visible | Marking under-sink valves |
| Installation verification & leak test | Run-through, leak check, and operational test after an installation | Faucet install final check |
| Basic compatibility check for installs | Confirm size/type constraints and flag mismatch before work begins | Disposal flange size check |
| Clean work zone practices | Drop cloths, careful staging, and cleanup of small debris | Wipe-down after trap swap |
| Customer walkthrough & care guidance | Short handoff: how to operate, what to watch for, maintenance tips | How to reset a disposal |
| Photo documentation (when helpful) | Before/after photos for clarity and your records | Corroded angle stop noted |
| Estimate range and options explained | You get a clear scope, options, and why one path costs more | Repair vs replace faucet |
| Follow-up recommendation list | If we spot related risks, we list them without pressure | Aging hoses noted for later |
| What we do not do (not included) | Boundary so you can plan | Why it matters |
| Structural or cosmetic repairs | Drywall, cabinetry, tile, paint, flooring are outside plumbing scope | Access hole patching |
| Hazardous material abatement | No asbestos, mold remediation, or lead paint services | Older insulation concerns |
| Major excavation / sewer line replacement | No trenching or heavy equipment in standard visits | Collapsed yard line |
| Gas line work (unless explicitly agreed and permitted) | If local rules allow, it must be separate scope | Gas appliance hookup |
| Electrical circuit modifications | We do not rewire outlets or panels | Dishwasher circuit issues |
| Parts supplied outside spec | We won’t install incompatible or unsafe customer-supplied parts | Wrong rough-in toilet |
| Emergency flood restoration | We can advise shutoff steps, but restoration is separate trade | Water extraction needs |
Why boundaries matter
Most “bad plumbing experiences” happen when the scope wasn’t defined. A clear boundary means we can quote and schedule more accurately, and you can compare providers on the same work unit. If you’re collecting estimates, ask every provider to point to the same line item in the pricing matrix so comparisons are apples-to-apples.
Factors that affect time and cost
Plumbing quotes vary for valid reasons. This list explains what changes labor and parts needs—so you can predict where your scenario sits. For quick reference by scenario, go to /pricing/#matrix.
| Cost factor | Why it changes time/cost | How you can reduce surprises |
|---|---|---|
| Accessibility of the component | Tight cabinets, blocked shutoffs, or hidden piping increases labor | Clear under-sink areas; note any stuck doors |
| Corrosion/age of existing parts | Old fittings may seize or crumble, requiring additional replacements | Share photos of valves/fittings ahead of time |
| Type of pipe material | Different methods/parts for copper, PEX, CPVC, galvanized | Tell us what you know; send a close-up |
| Severity of leak/clog | A slow drip differs from active spray or repeated backups | Describe frequency and when it worsens |
| Need for replacement vs repair | Some components are not economical to rebuild | Budget for a “repair or replace” decision |
| Code/permit constraints (if applicable) | Certain installs require specific components or permits | Ask about your city/county rules early |
| Parts availability and quality tier | Same-day work depends on stocked items and chosen grade | Decide “standard vs premium” in advance |
| Multiple fixtures affected | System-wide symptoms take more diagnosis | List every symptom and where it happens |
| Water shutoff condition | If a shutoff fails, it may need replacement to proceed safely | Test gently if you can; don’t force stuck valves |
| Prior DIY/previous repairs | Mixed parts and prior sealants can complicate disassembly | Tell us what was tried; save packaging if available |
| Timing constraints / access windows | Tight windows may require staging and alternative steps | Confirm arrival window and access plan |
If you’re dealing with a leak
- Identify if it’s constant or only when used.
- Confirm where water appears first (highest wet point).
- Know how to shut water off safely.
If you’re dealing with a clog
- Note whether other drains are affected.
- Tell us what products/tools were used (if any).
- Stop using the fixture if it backs up.
If you’re planning an install
- Confirm measurements (rough-in, hole count, mount type).
- Plan for shutoff reliability (valves sometimes fail).
- Keep receipts and packaging until testing is done.
Reviews (process and transparency)
We structure visits around scope definition, clear options, and verification. These notes reflect what customers tend to notice: communication, boundaries, and whether the work matches the plan.
“Clear communication about what was included, what wasn’t, and what options made sense. The visit felt organized and transparent.”
“The estimate breakdown and the “factors that affect cost” table were genuinely helpful. No pressure—just practical guidance.”
“Scheduling, arrival window, and follow-up steps were explained up front. The process page matched what happened in person.”
Next step: choose a scope, then confirm availability
If you want the fastest scheduling and the least ambiguity, pick the closest scope line in the pricing matrix, then contact us with a short symptom description and photos if possible.